Installing a Brick Paver Walkway or Single Bricks

Making use of Installing a Brick Paver Walkway or Building Brick Wall or Pavers to produce a pathway or patio matches a house in a way that is unrivaled. It includes a level of quality and beauty to a house entrance that can not be achieved with either concrete or asphalt. Brick and Pavers likewise come in several colors and shapes permitting special color pattern and patterns to be achieved. In addition, setting up a Brick or Paver walkway does not always need a pro. With some fundamental understanding and a fairly basic walkway plan, a property owner can undertaking such a task.

The key to setting up a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be installed. The area needs to be dug out a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines need to be strung on each side of the walkway. The string lines indicate the completed height of the pathway.
When the area has actually been dug down, 3/4" gravel stone need to be laid in and tamped down securely. The height between the tamped down sand and the stringline ought to equal the density of the brick or paver.

Now that you have a stable base, place a 1" pipeline or ledger board the length of the sidewalk on either side of the walkway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level surface location to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the ready location. These strips will act as your sidewalk border and help to preserve the stability and shape of the pathway.

The key to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again help maintain the integrity of the walkway.

Undoubtedly bricks/pavers will require to be cut or divided when developing the walkway. To in fact cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the spot where you desire to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.

After installing the bricks, build up the outside edges with additional sand, and after that shovel in the topsoil and pack down strongly.
Spread stone dust over the new pathway and sweep into the fractures. Repeat this process a number of times to ensure the fractures are fully filled. This will complete the interlocking of the bricks and assist to remove any weed growth. Just include turf seed to the outdoors edges and you should have a beautiful entrance to your house within a number of weeks.


In addition, setting up a Brick or Paver walkway does not necessarily require a pro. The key to installing a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be installed. Now that you have a stable cement hollow bricks base, place a 1" pipe or ledger board the length of the pathway on white bricks either side of the pathway. These strips will act as your pathway border and aid to keep the stability and shape of the sidewalk. Undoubtedly bricks/pavers will require to be cut or split when developing the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *